manualshive.com logo in svg
background image

RYOBI TECHNOLOGIES AUSTRALIA PTY. LTD.

GUARANTEE

RYOBI TECHNOLOGIES AUSTRALIA PTY. LTD.

A.B.N. 98 002 277 509

SYDNEY: 359-361 Horsley Road, Milperra, N.S.W. 2214.

Contact during normal business hours.

 RYOBI NEW ZEALAND PTY. LTD.

AUCKLAND:

 

27 Clemow Drive, Mt Wellington, N.Z.

Contact during normal business hours.

Subject to the guarantee condition below, this Ryobi tool

(hereinafter called “the product”) is guaranteed by Ryobi

(hereinafter called “the Company”) to be free from

defects in material or workmanship for a period of 24

months from the date of original purchase covering

both parts and labour. Under the terms of this

guarantee, the repair or replacement of any part shall

be the opinion of the Company or its authorised agent.

Should service become necessary during the warranty

period, the owner should contact the 

RYOBI HELPLINE

1300 361 505 or contact the retailer from whom the 

product was purchased.

In order to obtain guarantee service, the owner  must

present the sales docket and Guarantee Certificate

to confirm date of purchase. This product is sold  by the

dealer or agent as principal and the dealer has no 

authority from the Company to give any additional

guarantee on the Company’s behalf except as  herein

contained or herein referred to.

Guarantee Conditions

This guarantee only applies provided that the Product

has been used in accordance with the manufacturer’s

recommendations under normal use and reasonable

care (in the opinion of the Company) and such

guarantee does not cover damage, malfunction or

failure resulting from misuse, neglect, abuse, or used

for a purpose for which it was not designed or is not

suited and no repairs, alterations or modifications

have been attempted by other than an Authorised

Service Agent. This guarantee will not apply if the tool is

damaged by accident or if repairs arise from normal

wear and tear.

The Company accepts no additional liability pursuant to

this guarantee for the costs of travelling or

transportation of the Product or parts to and from the

service dealer or agent - such costs are not included in

this guarantee.

Certain legislation, including the Trade Practices Act,

1974 (as amended) and other state and territorial laws

give rights to the buyer and impose liability on the seller in

certain circumstances. Nothing herein shall have the effect

of excluding, restricting or modifying any condition,

guarantee, right or liability imposed, to the extent only

that such exclusion, restriction or modification

would render any term herein void.

BRISBANE :

                          All enquiries Tel : 1300 361 505

TOWNSVILLE:                      

All enquiries Tel : 1300 361 505

MELBOURNE:

      960 Stud Road, Rowville,Vic. 3178

Tel : (03) 9764 8656

HOBART:                             

All enquiries Tel : 1300 361 505

ADELAIDE:                          

All enquiries Tel : 1300 361 505

PERTH:   

33-35 Sorbonne Cres. Canning Vale, W.A. 6155

Address Of Dealer

Present  This Form With Your Purchase Docket  When Guarantee Service Is Required.

Tel: (02) 9792 9800 - Fax: 1800 807 993 - www.ryobi.com.au

Tel: (09) 573 0230 - Free Call: 0800 279 624 - Fax: (09) 573 0231 - www.ryobi.co.nz

For your record and to assist in establishing date of purchase (necessary for in-guarantee service)

please keep your purchase docket and this form completed with the following particulars.

This Guarantee Form Should Be Retained By The Customer At All Times

Date                                Model No                                    Serial No

Tel : (08) 9455 7775

Содержание CCG180L
















Отзывы:

Похожие инструкции для CCG180L