Ryobi AJP-2200GQ, Руководство по эксплуатации для владельца, Страница: 14 / 20

13
Environmental protection
Recycle unwanted materials instead of disposing
of them as waste. All tools, hoses and packaging
should be sorted, taken to the local recycling
centre and disposed of in an environmentally safe
way.
WARNING: Do not use appliance without reading
the instruction sheet
Machine not suitable for connection to the potable
water mains
To reduce the risk of injury, user must keep all
bystanders at least 1m away.
. Fix the spray handle hose to the connection.
Firmly insert the spray handle hose into the connection,
and fix by inserting the fixing pin.
Pull the spray handle hose and check that it doesn’t
come out.
6. Close the hose reel cover.
7. Put the hose guide in the position shown in fig. 50.
8. Wind the spray handle hose.
Turn the hose reel handle and wind the spray handle
hose.
Refer to “Wind the spray handle hose”.
Cleaning of machine vents
The machine should be kept clean so as to let cooling air
pass freely through air vents.
Storing the Unit
• The hoses, nozzles, and spray handle may be stored on
the main unit as shown in Figure 1.
Storage
Pump, hose and accessories should always be emptied of
water prior to storing as follows:
1. Long periods of nonuse: If the machine is going to be
stored for longer periods of time (i.e. over three months)
in a room where frost could develop, it is recommended
that the machine be filled with an antifreeze solution
(similar to the antifreeze solutions used for vehicles).
. When the device is not used for an extended period of
time, lime deposits begin to form in the motor pump,
which in turn can lead to starting difficulties.
NEVER START UP A FROZEN MACHINE.
Frost damages are not covered by the guarantee!