background image

15

SYMBOLS

Safety Alert Symbol

Indicates danger, warning or caution. It means attention!!! 

Your safety is involved.

Read Your Operator's

Manual

Your manual contains special messages to bring attention

to potential safety concerns as well as operating and 

servicing information. Please read all the information 

carefully to ensure satisfaction and safe use.

Wear eye, hearing and

head protection

Wear eye, hearing and head protection when operating

this equipment.

Remove the power

supply

Disconnect from the power supply when not in use or 

for maintenance and repair.

Protect from frost

Always store this machine in a dry place that will not fall 

below 0˚C

Never aim the water jet

at people or animals

High-pressure jets can be dangerous if improperly used. 

The jet may not be directed at persons, animals, live 

electrical equipment or at the appliance itself. 

Recycle Symbol

Waste electrical products should not be disposed of with 

household waste. Please recycle where facilities exist. 

Check with your Local Authority or retailer for recycling 

advice.

CE Marking

Conforms to relevant safety standards.  

Insulation Symbol

Double insulated for additional protection.

PROTECT

FROM

FROST

Do not use on drinking 

water supply.

According to the applicable regulations, the appliance 

must never be used on the drinking water supply without

a system separator

Содержание AJP-1280

















Отзывы: