Ryobi AIRgrip ELL0001, Руководство оператора

Страница: 3 / 18

2 3
WARNING!
READ AND UNDERSTAND ALL IN-
STRUCTIONS. Failure to follow all
instructions listed below, may result in
electric shock, fire and/or serious per-
sonal injury.
CAUTION:
Use of controls or adjustments or perfor-
mance of procedures other than those
specified herein may result in hazardous
radiation exposure.
CAUTION:
The use of an optical instrument with this
product will increase eye hazard.
The laser guide radiation used in this laser
level is Class IIIa with < 5mW and 635 nm
wavelengths. These lasers do not normally
present an optical hazard although staring at
the beam may cause flash blindness.
n
Avoid direct eye exposure when using
the laser and do not project the laser
beam directly into the eyes of others.
Serious eye injury could result.
n
Do not remove or deface any prod-
uct labels.
Removing product labels
increases the risk of exposure to laser
radiation.
n
Do not place the laser level in a position
that may cause anyone to stare into the
laser beam intentionally or unintention-
ally.
Serious eye injury could result.
n
Do not operate the laser level around
children or allow children to operate the
tool. Serious eye injury could result.
n
Always turn the laser level off when not
in use.
Leaving the tool on increases the
risk of someone inadvertently staring into
the laser beam.
n
Do not operate the laser level in com-
bustible areas such as in the presence
of flammable liquids, gasses or dust.
n
Do not use push pins unless you plan to
affix the base to a soft wood, wallboard,
or other easily penetrated surface. This
could result in injury because the pins are
very sharp instruments.
n
Always ensure the laser beam is aimed
at a surface without reflective proper-
ties. Shiny reflective materials are not
suitable for laser use.
n
When using the base, always check
to be sure the laser level is securely
seated. Damage to the tool and/or seri-
ous injury to the user could result if the
laser level falls.
n
All repairs should be made by an autho-
rized service representative or the laser
manufacturer.
n
Handle the laser level with care.
Treat it
as you would any other optical device such
as a camera or binoculars.
SAFETY RULES