Ryobi 0252040 Скачать руководство пользователя страница 15

Страница: 15 / 16

WARNING!

The declared vibration total values and the

declared noise emission values given in this instruction

manual have been measured in accordance with a

standardised test and may be used to compare one

tool with another. They may be used for a preliminary

assessment of exposure.
The declared vibration and noise emission values

represent the main applications of the tool. However, if the

tool is used for different applications, used with different

accessories, or poorly maintained, the vibration and noise

emission may differ. These conditions may significantly

increase the exposure levels over the total working period.
An estimation of the level of exposure to vibration and

noise should take into account the times when the tool

is turned off or when it is running idle. These conditions

may significantly reduce the exposure level over the total

working period.
Identify additional safety measures to protect the operator

from the effects of vibration and noise, such as maintaining

the tool and the accessories, keeping the hands warm (in

case of vibration), and organising work patterns.

Содержание 0252040











