•
Maintenance Guide
Periodic Maintenance
This melter / applicator requires periodic maintenance before each use and at set intervals in order to ensure it
is performing safely and optimally. The table below describes checks and maintenance which are
recommended.
Description
Before Each
Use
Every 25
Hours
Every 75
Hours
Check Propane Tank fuel level, refill as needed
X
Inspect regulator and hose for physical damage or leaks
X
Inspect front caster wheel, apply grease and tighten fasteners as
required
X
Inspect thermometer for physical damage or malfunctions
X
Heat up the valve with a heating torch to remove any residual
material build up
X
Remove and thoroughly clean control valve
X
