RynoWorx RA-MLT-0005, Руководство оператора, Страница: 29 / 31


Maintenance Guide
Periodic Maintenance
This melter / applicator requires periodic maintenance before each use and at set intervals in order to ensure it
is performing safely and optimally. The table below describes checks and maintenance which are
recommended.
Description Before Each
Use
Every 25
Hours
Every 75
Hours
Check Propane Tank fuel level, refill as needed X
Inspect regulator and hose for physical damage or leaks X
Inspect front caster wheel, apply grease and tighten fasteners as
required
X
Inspect thermometer for physical damage or malfunctions X
Remove and thoroughly clean control valve X
Remove and replace left and right side wheel bushings as
required
X
Procedure for Removing the Flow Valve
1) Remove the cotter pin from the
control arm. 2) Remove the control arm from
the valve and fully rotate the valve
counter-clockwise past the valve
collar. 3) Pull the valve out of the tube.