Step 2 - Filling with Engine Fuel
PREPARING TO OPERATE THE LAWNMOWER
OPERATE
9
10
CAUTION!
Always use clean, fresh unleaded petrol. Purchase fuel in quantities that can be
used within 30 days. Never mix oil with petrol.
CAUTION!
Do not fill into the base of neck to allow for fuel expansion. Do not overfill the
fuel tank.
WARNING!
Petrol is highly flammable and extreme precaution must be taken when
handling or working with it. Keep out of reach of children.
CAUTION!
To prevent engine damage the engine is shipped without oil or petrol. The
engine must be filled with the correct grade of oil and petrol before starting the engine.
WARNING!
Refuel in a well-ventilated area with the engine stopped. Do not smoke or
allow flames or sparks in the area where the engine is refueled or where petrol is stored.
Avoid repeated or prolonged contact with skin or breathing of Vapour.
Clean the area around the petrol filler cap before removing the cap.
Remove the warning tag,check the fuel level.
Refill the tank if the fuel level is low.
Refuel carefully to avoid overfilling or spilling fuel. There should be no fuel in the filler
neck.
Clean up any overflow or splashes of petrol before starting the engine
Refit the filler cap after filling
Helpline: 01904727504
Email: [email protected]
Website: www.coreservice.co.uk
Helpline: 01904727504
Email: [email protected]
Website: www.coreservice.co.uk
Step 1 - Setting the Cutting Height
Step 2 - Starting the Engine
2a Starting procedure quick guide
2a
WARNING!
The blade can cause serious injury. Before adjusting the mower height, stop the engine and
wait for the mower blade to stop completely.
WARNING!
Do not operate the machine in an enclosed or poorly ventilated areas as the
exhaust gas contains toxic substances. Keep hands, feet, hair and clothing away from all
the moving parts of the machine. The exhaust and other parts of the machine will become
hot during use.
Make sure that the blade is securely fastened before starting the engine.
NOTE!
To start the engine, make sure that the spark plug cap is located on the spark plug
and the machine is filled with sufficient oil and petrol.
NOTE!
Never use the lowest cutting height for the first cut of the season or in drought conditions.
Only about one thirds of the grass height should be cut.
1 Pull the lever towards the wheel, then move it forward or backward to adjust the cutting height.
2 Move it to any one of the 5 positions for the desired cutting height.
3 Return lever into securing plate.
