FCC ID: 2AK270101B
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, use and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: Reorient or relocate
the receiving antenna; Increase the separation between the equipment and
receiver; Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected; Consult the dealer or an
experienced radio/TV technician for help. This device complies with Part 15
of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must
accept any interference received including interference that may cause
undesired operation.
RF exposure warning: This equipment complies with the FCC RF exposure
limits set forth for an uncontrolled environment. This equipment must not be
co-located or operating in conjunction with any other antenna or
transmitter.
Warning: Any changes or modifications not expressly approved by the
grantee of this device could void the user’s authority to operate this
equipment.
Manufacturer: Rylo Inc.
Address: PO BOX 77234, San Francisco, CA 94107, USA.
Model: A0101
Hardware Version: M02
Software Version: 238
Operating Frequency Range: 2400- 2483.5 MHz
Max Output Power: <5dBm
