3) Remove the knee bolster on the driver side as well as the A-pillar cover (it may
also be necessary to remove the sun visor and maybe even the overhead
console in order to freely route the power harness from the knee bolster to the
mirror connector).
4) Install the Exterior Temperature Sensor (longer sensor wire) at Front grill (away
from the Engine heat)
5) Install the Interior Temperature Sensor (shorter sensor wire) away from the A/C
ventilation through A-pillar
6) Install the mirror and connect the power harness to the mirror and use supplied
mirror harness wire cover in order to neatly route the cable up the windshield to
the headliner.
Important!
Make sure to route the wire behind the airbag for safety precaution.
2