11
VIII. Troubleshooting:
NO.
Issue
Reason
Solution
1
LED light does not
illuminate
Incorrect connection or pins
not making contact
Check the harness and make
sure connection is correct
LED light is broken
Replace LED light
2
Opposite LED
indicator
Microwave sensor or LED
indicators are plugged in to the
opposite connector
Make sure RED is driver side and
YELLOW is passenger side.
3
Buzzer does not work
Wrong connection or pins not
making contact
Check the harness and make
sure connection is correct
Defective buzzer speaker
Replace buzzer
4
Sensors or GPS does
not work
Sensors or GPS module are
covered by the metal bumper
or other metal obstruction
Find the best location where the
GPS antenna cannot be blocked
by any metal, clear shot of sky
5
Unit does not work
after GPS is
connected
Blind spot system does not
trigger the sensors if the speed
is less than 20mph
Normal behavior in this case.
The GPS needs to detect
+20mph to trigger the sensors
IX. Technical Support Contact Info.
•
Telephone:
1
-
877
-
777
-
8811 (within USA only)
•
Email: [email protected]
•
Web Address: www.rydeenmobile.com
X. Limited Warranty
Rydeen North America Inc. (a manufacturer of “Rydeen" products) warrants this product (BSS2) only
to the original purchaser as described following:
