ryan 744844F, Инструкция по эксплуатации и запасным частям, Страница: 18 / 33

16
Jr.
Sodcutter
SPECIFICATIONS
STANDARDS:
NOISE:
Noise in the Enviornment Directive 2000/14/EC
Guaranteed Sould Power Level ......... 107dB(A)
Assessment Procedure ........................Annex V
Machinery Directive 98/37/EC
Ear Operator (Sound Presure) ......... 90.0dB(A)
VIBRATION:
The machine was tested for hand/arm vibration. The
operator was in the normal operating position with
both hands on the handgrips. The engine was run-
ning at maximum speed and the cutting mechanism
was operating with the machine stationary.
Measurement per
ISO5349-1-2001.
744844F, 744944B
Hand /Arm Acceleration: ..................... 40.3m/s²
Max of right left vector sum of X, Y, and Z values
744845F, 744945B
Hand /Arm Acceleration: ..................... 32.4m/s²
Max of right left vector sum of X, Y, and Z values
Machinery Directive 98/37/EC
By Direct compliance
Models: 744844F......Jr. Sodcutter - 12 in.(30.5cm)
744845F......Jr. Sodcutter - 18 in.(45.7cm)
Engine
Model.............4 cycle 6.5H.P.(4.8KW) B&S Vangaurd,
Model 12H332, Type 0115,
Trim B8, 12.5 cu. in. (205 cc)
Starter...................................................... Recoil
Governor..........
3600 RPM + 100 RPM, no load
Clutch............... spring loaded belt tightener type
Reduction
Engine to blade....................................... 2.94:1
Engine to drive wheels............................ 55.8:1
Models: 744944B.....Jr. Sodcutter - 12 in.(30.5cm)
744945B.....Jr. Sodcutter - 18 in.(45.7cm)
Engine
Model................ 4 cycle 5.5 H.P. Honda
Model GX160-K1QX2, GX160 OHV
9.9 cu. in. (163 cc)
Starter...................................................... Recoil
Governor..........
3600 RPM + 100 RPM, no load
Clutch............... spring loaded belt tightener type
Reduction
Engine to blade....................................... 2.94:1
Engine to drive wheels............................ 55.8:1
Wheels:
Drive................. 8" (203 mm) Dia. w/knobby
tread vulcanized to hub
Rear.............8 x 1.75 (203 X 45mm) semi-pneumatic
tires
with pre-packed ball bearings
Drive:
Engine to gear case................. "A" section belt
Gear case to drive shaft
and blade drive...........................................roller chain
Gear case:
Lubrication.................................. EP140 Gear lube
Capacity...................................... 3 1/2 Pints (1.7L)
Cutting width:
744844F & 744944B.................. 11 3/4" (298 mm)
744845F & 744945B.................. 18" (457 mm)
Blade pitch:
Hand lever adjustment............... variable 0
O
to 9
O
Blade speed: .....
1225 oscillations/min @ 3600 engine RPM
Dimensions:
Width.......................................... 24" (600 mm)
Length........................................ 49" (1244 mm)
Height.........................................
33" (838 mm)
Wheelbase................................. 19" (483 mm)
Weight:
744844F & 744944B................ 305 lbs. (138 Kg)
744845F & 744945B................ 350 lbs. (159 Kg)
TOUCH -UP PAINT:
16OZ. (0.5L) Spray can, order P/N 65334