RYAN Six Drawer Tallboy - FRT6 12
For assembly advice or parts go to www.farmersfurniture.co.nz or call 0800 100 858
STEP 3
Carefully turn the Tallboy onto its front edge. Make sure the surface is clear.
The Back Panel is made up of two pieces.
1 x Panel with a tongue on the long edge
1 x Panel with a groove on the long edge
Fit the Back Panel with the groove to one side of the Tallboy. Fit the panel with the tongue to this panel.
Make sure the panels fit tightly together and the ends of the Tallboy are straight and the panel is sitting
square. Tap a few nails in to hold it in place before nailing completely into place.
Space the nails about 100 - 150mm apart.
