Follow these steps to mount ear tips:
1. Push the Ear Tip over ribs flange on the sound
tube.
2.
IMPORTANT:
Make sure the ear tip is properly
and securely mounted. Refer to User Guide to
determine proper ear tip choice.
Removal
-
Rotate tube counter
-
clockwise in
direction of arrow.
Replace Tubing
-
Thread tube clockwise in
direction of arrow until tight.
Grab tube at base
when turning
1
2
Battery Level
+
Volume
UP
-
Volume
DOWN
P
Change
PROGRAM
P1
-
1 Beep
P2
-
2 Beeps
P3
-
3 Beeps
Phone APP Control
On either Apple or Android
smartphones download
and install
HA Smart.
Turn on Bluetooth
and Location
Lift LEFT hearing from
case (it will automatically
turn ON)
Open APP
Click CONNECT
When connected click SET
Choose LEFT
Click SAVE
REPEAT same procedure
for the RIGHT device.
AudixPro
AudixPro
Ear Tip Removal / Installation
1
2
Tube Removal / Installation
Care / Maintenence
Keep tips, switch, battery contacts and tubes clean
with provided cleaning tool.
IF NO SOUND, see Troubleshooting in User Guide.
FAQ
’
s
How Long Should I Wear New Devices?
For the first week we recommend wearing your
hearing aids for only a couple hours a day. As
you become more acclimated with your new
devices, gradually increase your daily use as
you feel comfortable.
Why Do I Hear my Own Voice?
Wearing any device in your ear can create what
is called
“
occlusion
”.
This may draw your
attention to your voice, footsteps, etc. This is
normal. Your senses will adjust to your new
amplification and the occlusion will fade away
within 30 days. Using the next smaller sized ear
tip will reduce this naturally occurring effect.
Why is There Whistling?
Whistling is caused by the sound from the
speaker looping back into the microphone. It is
the same as when a singer gets too close to the
speaker and it creates a squealing noise.
To reduce
“
whistling
”
make sure your device is
fully inserted into the ear. Reducing volume will
also eliminate whistling. Changing to a larger
or double domed tip will allow you to wear
your devices at higher volumes without
whistling.
Why is There No Sound?
If there is no sound please make sure your
devices are fully charged and volume is set at a
hearable level. If fully charged, the sound path
may be blocked with earwax. Please remove
the ear tip and tube. Clean them separately as
described in your User Guide and re
-
install.
Adjust devices
simultaneously
or separately.
P1
-
Standard
P2
-
Reduced Bass
P3
-
Noisy Situations
Follow these steps to remove ear tips:
1.
Firmly hold the tube with one hand.
2. With your other hand, pull ear tip until removed.
