[User Guide AutoSealer 1001]
[Rx Systems, Inc.]
Page 6
5 Operating Instru
ctions (con’t.)
5.
Time Setting:
The AutoSealer can be set to seal packages at 1 to 10 seconds.
Review the chart from the previous page to determine the appropriate time settings
for your medication packaging.
To set time – turn the black numbered dial to the listed time for your respective
card.
You are now ready to begin sealing cards. The temperature and time will be pre-set
each time the machine is turned on. Repeat steps (4) and (5) only to make
adjustments.
6.
Place filled sealing paddles (or trays on pressure board) in the AutoSealer. Always
seal two cards, even if second card is empty.
7.
Press the two green buttons at the same time; this two-hand action is for safety – do
not attempt to start the sealing process with one hand.
8.
When the heat plate releases pull the paddle(s)/trays from the AutoSealer.
