Rx Clear HydroSalt, Руководство по установке и эксплуатации

Страница: 4 / 24

3
OPERATION
The HydroSalt
™
is an automatic chlorine generation system for pool & spa sanitation.
The operation requires a low concentration of salt (sodium chloride) in the pool water at
levels low enough that it normally cannot be tasted. HydroSalt
™
automatically sanitizes
your pool by converting the salt into free chlorine, which kills bacteria and algae in the
pool through a process called electrolysis.
HydroSalt
™
is designed to handle the purification needs of the average residential
swimming pool up to 40,000 gallons (150,000 liters). The actual amount of chlorination
required to properly sanitize a pool varies depending upon bather load, rainfall, air
temperature, water temperature, pool’s exposure to sunlight, pool’s surface, and
cleanliness.
Note:
It is not recommended using the HydroSalt
™
to generate Bromine.
If your pool has natural stone as coping or decking, please check with a stone installation
specialist for the maintenance of the stone before installing the HydroSalt
™
Chlorine
Generator .
WATER CHEMISTRY
As with any pool, it is important that you maintain proper water chemistry of the pool water,
including pH, alkaline content, and calcium levels. The only special requirement for
HydroSalt
™
is to maintain proper levels of salt and stabilizer. It is important to maintain
these levels in order to prevent corrosion or scaling and to ensure maximum enjoyment of
the pool. Test your water periodically. It is recommended that pool water be professionally
tested a minimum of twice per season. Your local pool store can provide you with the
chemicals and procedures to adjust the water chemistry. Be sure to tell the pool store that
you are using a salt chlorine generator.
Note: Pool water chemistry must be in balance before using HydroSalt
™
chlorine
generator.