Remove the bushing.
Gently press the two buckles shown in Figure 7-2 toward the middle with both
hands to remove the cleaning tank.
Figure 7-2
Wipe device surfaces and other components with a wet cloth soaked in household
detergent or 70% ethanol.
Wipe device surfaces and other components for a second time with a wet cloth
soaked in distilled water.
An alkaline cleaner is recommended for cleaning removed shields, bushings and
cleaning tanks.
If the bushing or the cleaning tank is found damaged, replace them.
Reinstall the cleaning tank, bushings, and shields. Firstly, align the holes and
numbers as shown in Figure 7-3 to install the cleaning tank; secondly, install the
bushings, and finally, align the buckles as shown in Figure 7-4 to install the shield.
When components are installed correctly, there will be a slight clicking sound.
