5. Transport and storage
5.1 Transport
The device is fully assembled when delivered. It weighs approximately 1,275 g.
Attention!
Improper transport may damage the device!
The packaging serves as protection during transport.
Do not install the device if the packaging is severely damaged.
When submitted to hard shocks or impacts, replace the synthetic
part concerned (even if it shows no visible damage).
5.2 Storage
Store the device under the following ambient conditions only:
Temperature: +4°C +60°C, relative air humidity: max. 80%.
Attention!
Improper storage may damage the device!
Protect the valve and the electronic system against frost.
4.3 Design
1
LCD Display
2
Touch switch
3
Battery compartment
4
Battery
5
Emergency unlocking key
6
Cover of battery compartment with product-specific QR code
4.4 Function
The MultiSafe Leak Detector Control Valve is an efficient leakage protection system
according to DIN 3553. Thanks to continuous monitoring, any leak is detected at an early
stage and the risk of extensive water damage is reduced because the water supply is cut
off automatically.
The MultiSafe Leak Detector Control Valve features an electronic water metering device
(by means of a turbine), an electrically-driven shut-off valve, a pressure sensor to
monitor the smallest leakage volumes and a multifunctional display. In addition,
the device determines water hardness and indicates it in three stages.
The MultiSafe Leak Detector Control Valve can connect to the Reliance Valves App
via its access point. Provided there is an active internet connection, the MultiSafe
transmits the measured values from the drinking water installation, e.g. volume flow,
flow rate per time, duration of volume flow, pressure drop and temperature via
a secure connection.
Even if the Internet connection is down, the parameters will continue to be monitored.
However, during this period, there is no communication with the server and no
notification in case of deviations from set parameters. Of course, the system can
also operate without Internet connection.
The mains adapter is used for power supply. The scope of delivery includes a battery
for short-term protection in case of power failure.
1
2
3
4
5
6
9
8
RWC12124_MultiSafe_Smart_Leak_Detection_Operation&Maintenance_A5_28pp_AW_v2.indd 8-9
RWC12124_MultiSafe_Smart_Leak_Detection_Operation&Maintenance_A5_28pp_AW_v2.indd 8-9
27/08/2021 15:54
27/08/2021 15:54
