Reverse With Confidence
™
5
INST
ALL
ATION
GUIDE
Installation Guide
Step 1. Sensor Installation
Installation requirements: sensors should be mounted to the front corner of the
vehicle, Using screws to fix the sensor on the front of the vehicle.
Step 2. Installation of the left/right turn signal
Using the voltage Multi-meter, locate the left
and right turn signal trigger wires behind the
tail lamp. Once verified, connect the left and
right signal wires of the RVS-129 wire harness
to the correct signal wires.
Please note.
Letters R and L on the rub-
ber gasket, stands for right
sensor and left sensor.
SCREW
SENSOR HOUSING
RUBBER GASKET
L - Left Sensor
R - Right Sensor
