Rear View Safety
Reverse With Confidence
™
6
7
ALER
T C
ONDITIONS
Illumination of the LED indicator on the control box:
1.The LED comes on solid when the system is first powered up;
2.The LED blinks slowly while the GPS module is connected to the satellite;
3.The LED blinks quickly while sensing moving objects approaching in the blind spot
(same frequency as to the alarm LED indicators & the buzzer);
4.The LED maintains the last blinking status after the alerts have ended
(the last blinking status of alarming is off / on randomly)
Step 3. LED Indicator Installation
Place the LED indicators where it is visible for the driver. Ideally on the A-pillar
or in field view side mirrors.
Step 4. Buzzer Location
While installing the speaker, make sure it is not obstructed by any panels inside
the vehicle.
Step 6. Man Box Location
While installing the main box, use tape to mount it on the cab
1.
When the vehicle is on, the system
would start detecting objects in the
blind spot area in the lane next to
and behind the vehicle
, up to 82
feet.
2.
When vehicles are approaching
and their speed is faster than our
own speed.
L - Left LED
R - Right LED
Buzzer
Step 5. Tuck the wires neatly to hide and prevent wire pinch.
NOTE!
Alert Conditions
INST
ALL
ATION
GUIDE
