manualshive.com logo in svg

RVR Solar EasyStove, Инструкции по установке, использованию и обслуживанию

Поделиться
Скачать
RVR Solar EasyStove Скачать руководство пользователя страница 8

8

EasyStove

Installation, Usage and Maintenance Instructions

07.  DIMENSIONS

06.  INSTALLATION

The EasyStove is suitable for mounting indoors and should be protected from frost.  It should be mounted on 
a vertical wall capable of supporting the weight of the unit.  Leave adequate space around the unit to facili-
tate maintenance operations.

WALL MOUNTING

The EasyStove is normally supplied without a cover.  If the unit is equipped with a cover, it should be re-
moved and placed in a safe place. The cover is attached to the frame using four screws, two on the top and 
two on the bottom.

WITHOUT COVER

WITH COVER

Installation requires no. 4 screws Ø 8mm (not included), 
suitable for the type of wall.  The position must be selected to 
allow easy connection of the pipes to the appliance.

Once you have chosen the position of the unit, confirm that 
clearances for service are maintained and that the wall and fix-
ings are robust enough to support the weight of the appliance.

Содержание EasyStove















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды