copyright 2020 ruwido austria gmbh - this document is the intellectual property of ruwido austria gmbh and contains information. reproduction,
modification, communication to third parties and any other use is strictly prohibited without prior written accordance of ruwido.
ruwido_userguide_2855-001_model827A01_2020-12-14.docx
page 3 of 5
1
user operating instructions
1.1
manual pairing
-
power on STB
-
press “
play/pause
” and “
home
” keys for 3 seconds to start
pairing process (continuous red LED flashing)
LED will stop flashing red if pairing was successful
-
to delete pairing from remote control press “
skip back”
and
“skip forward”
keys for 3 seconds to delete pairing
LED will flash 4 times red if pairing deletion was successful
1.2
LED behavior
-
LED will flash red when BLE command is transmitted
-
LED will flash green when IR command is transmitted
1.3
factory reset
-
to set remote control back to factory mode press and hold “
apps”
+ “
left”
key
for a minimum of 3 seconds
LED will flash 4 times red