17
9. Emptying / Cleaning
Carefully lift the housing of the mois-
ture separator.
Pulling out the hose automatically acti-
vates the shut-off valve, thereby clos-
ing the suction connection.
Suction connection is closed by the
shut-off valve.
Remove the swirl filter insert. If neces-
sary, also wash out the strainer using a
strong jet of water.
Replace the strainer only when it is
clean.
The contents of the container should
be emptied out into a suitable vessel.
Dispose of the vacuumed material in
accordance with all applicable, nation-
al environmental regulations
Take the container out of the housing,
using both hands..
Carefully lift the housing of the mois-
ture separator.
Clean the container using a strong
water jet.
The wet separator including the mois-
ture separator should be cleaned regu-
larly.
How often cleaning is needed will vary
depending on duration of use and the
quantity and properties of the materials
that were vacuumed.
