Rutus Argo NE, Руководство пользователя

Страница: 14 / 22

Setting Adjustment range
Th Level 0 – 100
Th Tone 60 – 500 Hz
Tones 1, 5, Pr 1, Pr 2, Pr 3
Audio Gain 1 – 20
Masking 0 – 6
Reaction 1 – 3
Th Level
The Threshold is the background sound which is always heard while the detector is
active. It can be increased or decreased depending on the user’s preferences and the level of
noise at the search site. The level of the Threshold should be set so that it is only slightly
audible – in this way you can be sure that you will hear even the quietest signals from objects.
Th Level and Th Tone adjustments can be made in the menu at the same time as listening to
the effects of these changes.
Th Tone
The Threshold Tone should be set as you wish – each user will have their own
preferences as to the sound frequency which is the most appropriate.
Tones
The detector has the ability to change the quantity of the tones signaling detection of an
object. If you select 1 tone, the item is simply signaled by the increase in the volume of the
Threshold. If you select 5 tones then the signaling method is as follows:
ID Range Tone
-90 – 0 131 Hz
1 – 12 262 Hz
13 – 30 523 Hz
31 – 72 659 Hz
73 – 90 932 Hz
The user also has 3 custom sound programs. If any audio program is selected, there is
the option of programming any tone for the 20 identification sub-ranges (5 for the range from
-90 to 0 and 15 for the range 0 to +90).
Programming is as follows:
Select Program (Pr 1 or Pr 2 or Pr 3) in the menu, then press the button. This transfers to the
edit screen of the sound program. The buttons are used to choose the ID range for
which a specific tone is applied and the buttons are used to change the frequency of
the sound. Once all the required sounds have been determined from the edit screen, exit with
the trigger.These programs are common to Motion and Dual mode work.
RUTUS
Argo NE
13