Rutishauser HPLaserJet9000, Инструкция по установке и эксплуатации

Страница: 6 / 34

IU 675 / 0150 4 TowerFeed
TM
for the HP LaserJet 9000
UNPACKING
Note:
Prior to delivery your TowerFeed was thoroughly tested and care-
fully packaged. Please check your unit for transportation damage
and/or missing parts immediately upon receipt.
It is advisable to get a second person to help you unpack the unit.
Warning:
TowerFeed weighs up to 60 kilograms (130 pounds) depending
on configuration. Enlist the help of a second person to lift and
place the printer. To prevent back strain or injury, bend your
knees when lifting the unit.
Unpacking the TowerFeed unit
•
Cut the packing strips and remove the top of the shipping container.
•
Remove the two blue shock absorbers and the accessories box from
the top of the unit (Fig. 3)
.
•
If TowerFeed is delivered with the optional stand for the 4-tray unit,
remove the stand that is packed in front of TowerFeed (Fig. 4).
•
Enlist the help of another person and carefully lift TowerFeed out of
the container (Fig. 5).
•
Remove the stretched plastic from TowerFeed. Be careful to not
scratch the unit when using a cutting tool.
•
Insert the 4 rollers (from the accessories box) with some force onto
the roller shafts of TowerFeed. They will snap into position with a
noticeable click
. Insert the 2 stoppable rollers on the left side
(Fig. 7a) and the 2 non-stoppable ones on the right side of the
unit (Fig. 7b).
Note:
When turning TowerFeed over on a side or its back, be careful to
not scratch its housing. Use a piece of cardboard or the like to
prevent the unit from scratches.
•
Remove the transportation inserts in the TowerFeed trays (as de-
scribed in INSTALLATION)
Important:
It is recommended to keep the packaging material and inserts for
proper protection of the unit and its parts in case of reshipment.
Fig. 7
Fig. 6
Fig. 5
Fig. 4
Fig. 3
a
a
b
b