Manual
EX Outdoor
6500 K
IP67
IMPORTANT INSTALLATION INSTRUCTIONS:
1. Be sure to have a professional electrician complete installation. There
is no warranty coverage for any lights installed without observing
european safety directives.
2. Switch off voltage prior to installation. Ensure that voltage cannot be
accidentally switched on again.
3. VARDAFLEX LED strips is suitability for direct mounting on normal flam-
mable surfaces, e. g. on wood and wood-based materials with more
than 2 mm thickness.
4. Before turning the power on, check all connections for correctness and
short-circuit.
5. Never operate the LED strips when rolled up.
6. Cut the strips exactly at the specified severing lines.
7. Please make sure that an appropriate flex cross-section for the
connection between LED strip and controller is used.
8. Do not exceed the operating temperature of +40° C.
9. Please do not carry out any repairs yourself. Failure to comply may lead
to voiding of the manufacturer's guarantee.
Φ
30mm
minimum diameter
Ø 150 mm
Ø 150 mm
light emitting surface
light emitting surface
CAUTION:
light emitting surface
light emitting surface
light emitting surface
light emitting surface
power supply
24 V DC power supply unit with
constant output voltage
power/m
12 W
current strength/m
0.5 A
quantity LED/m
84
LED spacing
11.90 mm
dimensions of segments
83.33 mm, 7 LEDs
length
maximum length per connection
20 metres
dimensions
83.33* x 20 x 10 mm
bending diameter
min. 150 mm
temperature range
-30° C bis zu +40° C
processing temperature
+10°C bis zu +40°C
norm
EN 60079-28
TECHNICAL DATA:
✓
✓
✕
✕
✕
MOUNTING LED-STRIP:
