RUSTICA STRUT HANGER, Руководство по установке

Страница: 4 / 11

4
www.Rustica.com
STRUT HANGER Assembly Instructions
Figure 1
XX
XX
2-3/4” 2-3/4”
4-7/16 4-7/16””
7-15/16 7-15/16””
Door Door T Top op
Door F Door Front ront
NOTE:
Doors using Floor Mount Door Guides
will have a groove on the bottom edge.
Ensure this groove is on the bottom
when hanging the door.
1. Lay the door with the front facing up on a flat,
level surface.
2. Measure 2-3/4” from the edge of the door and
draw a line parallel to the door edge about 7-1/2
inches in length (Figure 1).
3. Measure 4-7/16” from the top of the door. Using a
pencil, mark the top hanger hole on the vertical
line (Figure 1).
4. Measure 7-15/16” from the top of the door. Mark
the bottom hanger hole on the vertical line
(Figure 1).
5. Repeat steps 2-4 for the opposite end of the
door. Set the hangers aside.
HANGER INSTALLATION