SAFETY CONSIDERATIONS
The machine is intended to be operated by qualified personnel who are familiar with relevant
safety requirements. Safety equipment necessary for the prevention of accidents at the
mounting and operation of machine shall be applied at all times.
It is the duty of the safety officers in charge to make sure that all personnel operating the
machine meet these demands.
The machine is operates using Diesel power. The transmission of these powers to the
mechanical drum represents a certain danger and must be maintained continuously.
• It is advised to wear ear protection when operating machine.
• It is advised to use air filters and lubricators on the motor when applicable.
• Always make sure the equipment on machine is in good condition.
• Always stop the power supply when maintaining or working on the machine.
• Use only original Rustibus
®
spare parts on the machine.
•
ALWAYS THINK SAFETY FIRST WHEN OPERATING MACHINE.
BEFORE STARTING THE OPERATION
Congratulations on your new
Rustibus®
de-scaling machine. In order to ensure your full benefit and
safety of operation we recommend you to read this operation manual carefully before starting.
Always lift up machine in order for chain drum to rotate freely when starting the machine.
(i)
Make sure all safety measurements are being considered.
(ii)
Check oil level.
(iii)
Start and stop the machine and check that rotation is correct according to marking
on machine.
(iv)
Scaling can start. Run machine forward and backward to achieve the best result.
(v)
Do not run machine over sharp edges, but along these. The chain drum will last
longer by working the machine with care.
(vi)
Use the Disposable Chain Drum until it is completely destroyed and then replace
the entire drum with a new one.
Genuine Rustibus® parts only!
Machine may vary from pictures
