Rustibus 040-X3000, Руководство по эксплуатации

Страница: 12 / 31

GENERAL MAiNtENACE
the Rustibus® machines are simple to use and simple to operate. When being well maintained a machine
can be of operational standard for many years.
SPARES AND REPLACMENT PARTS.
• ALL SPARE PARTS INTENDED FOR USE ON THIS RUSTIBUS MACHINE MUST BE GENUINE RUSTIBUS
SPARES TO MAINTAIN THE ATEX (Ex) CERTIFICATIONS.
USE OF NON GENUINE RUSTIBUS SPARES WILL BE CONSIDERED A MISUSE AND IN BREACH OF THE
ATEX REGULATIONS AND A BREACH OF GUARNTEE/WARRENTY.
FiLLiNG tHE stANDARD OiL-Mist LubRiCAtOR Lbs WitH OiL
Fig1. FiLLiNG tHE OiL REsERVOiR MANuALLY
Danger of injury if assembled under pressure!
Assembling when under pressure or electrical voltage can lead to injuries and damage to the
product or system components.
• Make sure that the relevant system part is not under voltage or pressure before you assemble
the product.
• Protect the system against being switched on.
Regularly check the oil level and refill if
the oil has reached the bottom edge of
the largewindow (a). Proceed as follows:
1. Remove the reservoir from the
maintenance device.
2. Fill the reservoir with the specified oil
(see “technical Data”) until oil appears
in the small window (b).
Note: If filling level is too high, oil can
reach the system and damage it.
3. Place the reservoir on the maintenance
device until it engages audibly.
Fig 2. sEttiNG tHE OiL AMOuNt
1. set the oil amount using the metering
screw on the standard oil-mist lubricator’s
drop attachment.
2. Determine amounts of oil discharged by
observing the number of drops in the
drop attachment.
Genuine Rustibus® parts only!
Machine may vary from pictures
Fig1.
Fig2.