2
Thank you for choosing to
purchase a product from Rusta!
Read through the entire manual
before installation and use!
ENG
Inflatable Santa
Read the user manual carefully to make sure that the product is assembled, used and
maintained correctly, as described in the instructions in this user manual. Keep the user
manual for future reference.
CONTENT
1 x Santa with built-in fan
1 x Transformer
2 x Anchoring cords
4 x Mooring pegs
INSTRUCTIONS
• Carefully unpack the santa from the packaging. Place the santa on a flat surface. Avoid
sharp objects that may damage the fabric.
• Unfold the santa and insert the plug. Hold gently by the santa’s hat. It takes around 15
seconds for the santa to fully inflate.
• Carefully lift the santa and adjust the weights in the back to ensure the santa is
standing upright.
• Anchor the santa by threading a cord through the loop located under the santa’s arm
and secure it to the pegs provided, one peg on each end of the cord. Stick the pegs into
the ground and tighten the cord in both directions. Follow the same procedure for the
other side of the santa.
IMPORTANT!
• The plug must be inserted for the santa to remain inflated. Remember that if the
fabric gets damaged, it is not possible to inflate the santa. Therefore choose a quiet,
protected spot and anchor the santa securely so that it does not blow away.
• The fan has a natural blowing sound, which is completely normal.
STORAGE
Remove the plug. The santa will slowly deflate. It takes up to 1 minute for the santa to
deflate fully. Store the santa in a dry place.
