RUSTA 913013320101, Руководство пользователя

Страница: 3 / 12

Voltage 12 V
Power 3 W
Safety class III
IP code
IP 44
12V
IP44
LED

12V
630.00.00
1
12V
IP44
LED

12V
630.00.00
3 4
12V IP44
LED

12V
630.00.00
12 V
12V IP44
LED

12V
630.00.00
2
ASSEMBLY
1. Unscrew the two screws at the side of the protective cover using a 2 mm Allen key in
order to remove the protective cover from the light.
2. Then secure the light in the required position against a facade/wall using screws (not
supplied) suitable for your facade/wall. If you are unsure which screws are suitable
for your wall/facade, consultant an expert.
3. Replace the protective cover against the light and replace the screws using an Allen key.
4. Connect the light to the Belys transformer or another Belys product that is connected
to the Belys system’s transformer. Check that the plug is correctly installed and that
the cable does not move.
TECHNICAL DATA
3
RIGHT OF COMPLAINT
By law the product must be returned to the place of purchase along with the original
receipt in the event of a complaint. The user is liable for any damage to the product that
is caused by not using the product for its intended purpose or by not following this user
manual correctly. The right of complaint will not apply in these instances.
INFORMATION ABOUT HAZARDOUS WASTE
Used products should be handled separately from
household waste. They should be taken for recycling in
accordance with local rules for waste management.