RUSTA 907511930101, Руководство пользователя

Страница: 3 / 12

3
TECHNICAL DATA
Voltage
230V~50Hz
Power
90 W
Diameter
45 cm
Weight
6 kg
USE
• Check that the voltage in the electrical outlet is the same as specified on the floor
fan’s nameplate.
• Press down on the desired mode for speed setting: 0 (off), 1 (slow), 2 ( medium) or 3 (fast).
• Set the desired angle, tighten the nuts. Use the included wing nuts to help tighten the
nuts when setting the angle.
• Set the desired height.
CLEANING
• Remove the plug from the electrical outlet. Carefully remove the front and back protection
from the fan blades. Wipe off the oil residue with a soft cloth and mild cleaning agent.
• Polish with a dry cloth. Never use polishes or agent which could damage the surface of
the floor fan. Mount the fan blades and carefully screw on the front and rear protectors.
Front protector
Fan blades
Screw for fan blades
Rear protector
Washer
Washer
Nut
Screw
Power switch
Control panel
Spiral protector
Power cord
Cable terminal
Particle
Pipe base
Lock nut
Motor
Screw
Cord holder
RIGHT OF COMPLAINT
By law the product must be returned to the place of purchase along with the original
receipt in the event of a complaint. The user is liable for any damage to the product that
is caused by not using the product for its intended purpose or by not following this user
manual correctly. The right of complaint will not apply in these instances.
INFORMATION ABOUT HAZARDOUS WASTE
Used products should be handled separately from
household waste. They should be taken for recycling in
accordance with local rules for waste management.