RUSTA 900701020101, Руководство пользователя

Страница: 6 / 28

6
WARM INGREDIENTS
• Avoid lifting up the cover when mixing warm ingredients so the contents don’t splash out.
• Fill the glass container halfway.
• Start the blender in mode 1 or 2 and keep the button pressed down (do not press
repeatedly, it will then pulse).
• Slowly pour the liquid (hot broth, cream, etc.) into the glass container through the hole
in the cover.
• The blender should be on the whole time. (If the blender is turned off with warm liquid
in the glass container and then started again, it will - due to the motor’s high rotation
speed - build pressure from the bottom and may result in the cover becoming loose
and flying off).
CLEANING
• Remove the plug from the electrical outlet before you clean the blender.
• Clean the blender directly after using.
• Do not use caustic or abrasive cleaning agents or agents containing alcohol for
cleaning.
• Do not immerse the motor housing or base in water or other liquid. No parts may be
machine-washed!
• Hand wash the glass container and filling cap in warm water and light soap and rinse
under running water.
• The sealing ring and blade section can be cleaned by hand as needed. Lift up the glass
container carefully from the locking ring and lift up the blade section. Remove the
sealing ring. These parts can then be washed by hand.
• Wipe the blender casing with a damp cloth.
ASSEMBLY
• The plug should not remain in the electrical outlet
when the blender is mounted
• Put the sealing ring over the blade section (1 + 2).
• Attach the glass container to the base clockwise and make sure
the sealing ring is sitting correctly.
DO NOT attempt to turn the glass
container. Glass container is removed by
lifting upwards.
DO NOT rotate the glass container when
it is in place.
• The blender is now ready to use (3 + 4).
ENG
Fig. 1
Fig. 2