RUSTA 30801559010, Руководство пользователя

Страница: 5 / 36

5
INSTRUCTION TO CONNECT TO CLAMPS
Connect positive polarity (Red Clamp +) to positive terminal, and negative polarity (Black
clamp - ) to negative terminal to the battery.
BATTERY LIFE IN GOOD CONDITION
When the clamps connected correctly, the LED on the clamps will automatically change to
solid GREEN and wait 5 to 10 seconds to start your ignition.
BATTERY LIFE IN LOW CONDITION
When the clamps connected correctly, if LED keep blinking Green and Red means the
battery is too low to be detected and you MUST press and hold “Overload button” for 3
seconds to activate, the LED will change to solid GREEN and wait 5 to 10 seconds to start
your ignition.
WARNING!
IMPORTANT: PLEASE DO NOT PRESS AND HOLD OVERLOAD BUTTON, YOU MUST DIS-
CONNECT THE CLAMP IMMEDIATELY.
MANUAL OVERLOAD BUTTON ON THE CLAMPS
To enable, push and hold for three (3) seconds. Overload button is on the side of the
clamp.
WARNING!
Disables safety protection and manually forces to boost “On”. Only for use when a battery
is too low to be detected.
+
–