Russound ST2-XM Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 40

background image

34

NOTE:

The CAV6.6 firmware

must be version 2.00.01 or higher

and UNO-S2

firmware

must be version 3.00.01 or higher

to control the ST2-XM Tuner. Use

the

System Info Menu

of the CAV6.6 to check the firmware version. If the

firmware

is not the proper revision as noted here,

visit the

Document Center

at

www.russound.com

to obtain the latest version.

To Program the CAV6.6 to operate with the ST2-XM Tuner:

(refer to the CAV6.6 Instruction Manual for details)

1.

Enter the Setup Menu by pressing the Setup button on the side of the UNO-S2 keypad.

2.

SOURCE SETUP will appear. Enter the Source Setup Menu by pressing the Play button on the

UNO-S2 keypad.

3.

BASIC SETUP will appear. Enter the Basic Setup Menu by pressing the Play button again.

4.

SOURCE NUM will appear. Use + and - buttons to select the source number to which Tuner 1 (XM)

is connected. Press the Play button to enter your choice.

5.

SOURCE NAME will appear. Use + and - buttons to select the name for the source (e.g., Tuner 1

or XM). Press the Play button to enter your choice.

6.

COMMAND TYPE will appear. Select PERIPHERAL from the list. Press the Play button to enter this

choice.

7.

SAVE CHANGES? appears. Select “Yes” and press the Play button to save changes.

8.

SOURCE NUM appears again.

Repeat steps 4 through 7 to configure the second tuner.

9.

Press the Setup button three times to back out of the Installation Menu.

Source Configuration Note:

When the ST2-XM Tuner is used with the CAV6.6 or other RNET controller, it is configured as an
RNET command type “Peripheral” and is connected via the RNET bus. This makes the tuner behave
as a fully integrated device with UNO-S2 keypad support. Each tuner must be set up with a unique
source number (1 - 6) or unassigned. An unassigned tuner is not controlled by the RNET bus.

Key Function Note:

When using the tuner with the CAV6.6-S2 system, do not reassign keypad and remote buttons for
tuner control in the CAV6.6 Key Configuration Menu. When the tuner is assigned the “Peripheral” com-
mand type in the CAV6.6 Setup Menu, key assignments and functions are automatically assigned and
will operate as shown in the preceding UNO-S2 keypad and UNO-LRC1 remote diagrams.

ST2-XM TUNER PROGRAMMING

PROGRAMMING FOR CAV6.6 USE

«
...
32
33
34
35
36
...
»

Содержание ST2-XM









































Отзывы:

Нет отзывов

Похожие инструкции для ST2-XM

Бренд: NAD Страницы: 2

Бренд: NAD Страницы: 4

Бренд: NAD Страницы: 16

Бренд: PINKERTON Страницы: 10

Бренд: Yamaha Audio Страницы: 22

Superchips 3825

Бренд: Superchips Страницы: 12

Бренд: Revox Страницы: 46

Бренд: Teac Страницы: 12

Sound Player - 2

Бренд: Elko Страницы: 19

Бренд: Pace Страницы: 2

PMD800 Professional

Бренд: Marantz Страницы: 34

PYLE View Series PLTK300

Бренд: Pyle Страницы: 3

Бренд: Xantech Страницы: 13

Бренд: Akai Страницы: 44

Бренд: Harman Kardon Страницы: 8

Бренд: QUAD Страницы: 18

Бренд: Boss Страницы: 2

Бренд: Panasonic Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды