LIMITED WARRANTY
The Russound 858P Plasma In-Wall IR Receiver is fully guaranteed for two (2) years from
the date of purchase against all defects in materials and workmanship. For this warranty
to apply, the unit must be installed and used according to its written instructions. During
this period, Russound will replace any defective parts and correct any defect in workman-
ship without charge for either parts or labor. Accidental damage and shipping damage are
not considered defects under the terms of this warranty. Russound assumes no responsibil-
ity for defects resulting from abuse or servicing performed by an agency or person not
specifically authorized in writing by Russound. If service is necessary, it must be performed
by Russound. Damage to or destruction of components due to excessive power voids the
warranty. In these cases, the repair will be made at the owner’s expense. To return for
repairs, the unit must be shipped to Russound at the owner’s expense, along with a note
explaining the nature of the service required. Be sure to pack in a corrugated container
with at least 3 inches of resilient material to protect the unit from damage in transit.
Before returning a unit for repair, call Russound at (603) 659-5170 for a Return
Authorization number. Write the RA number on the shipping label and ship to: Russound,
ATTN: Service, 5 Forbes Road, Newmarket NH 03857
Russound sells product only through authorized Dealers and Distributors to ensure that
customers obtain proper support and service. Any Russound product purchased from an
unauthorized dealer or other source, including retailers, mail order sellers and online sellers
will not be honored or serviced under existing Russound warranty policy. Any sale of prod-
ucts by an unauthorized source or other manner not authorized by Russound shall void
the warranty on the applicable product.
5 Forbes Rd. Newmarket, NH 03857, USA
Tel 603.659.5170 • Fax 603.659.5388
e-mail: [email protected]
IR RECEIVER
SaphIR
858P Plasma In-Wall
Decora
®
Style Infrared Receiver
Plasma and CFL Friendly
Instruction Manual
Decora
®
is a trademark of Leviton Corporation
Patented
PRODUCT OVERVIEW
The 858P Plasma In-Wall IR Receiver r
eceives IR signals from a handheld IR
remote contr
ol and relays these signals to the audio/video equipment for
operation fr
om another room. Mounts to a single gang J-Box using a
Decora
®
cover plate.
FEATURES
•
Plasma-friendly - can be placed near plasma TVs and displays.
•
CFL-friendly - allows installations in ar
eas with compact fluorescent
lighting. Works in most lighting envir
onments.
•
Stylish Decora
®
design. Available in white, almond, bone, black or brown.
•
Dual color LED. Green for system status and blue for talkback.
•
Ultra thin design. Mounts easily in any J-box or P-ring.
•
Wide band IR. Receives IR from many types of r
emotes.
WIRE CONNECTIONS - SHIELDED CABLE
The 858P Plasma In-Wall can be connected to the 857 connecting block
using shielded 2-twisted pair wire (A
W2260AB). Use one pair to connect
GND (GROUND) and IR (SIGNAL). Use the other pair to connect ST (STA
TUS)
and V+ (+12VDC). Connect the shield or drain to the gr
ound at the connect-
ing block ONLY,
leaving the shield or drain
disconnected
at the 858P.
Connecting in this method will help reduce induced noise. See Figur
e 1 for
detail of these connections.
Figure 1
08/12/04
EMITTER PORTS
857
CONNECTING
BLOCK
123456
IR R
ECEIVER
I
N
IR C
OMMON
I
N
IR C
ONFIRM
+
12VDC
GND
STAT
US
SIGNA
L
EMITTERS
S
TATU
S
+12VDC
P
OWER
+12VDC
DESIGNED IN USA MADE IN KOREA
857
I
NFRARED
C
ONNECTING
B
LOCK
CONNECT TO
846C POWER
SUPPLY
ST
IR
GND
V+
2-TWISTED
PAIR WIRE
(AW22
6
0AB)
858P PLASMA IN-WALL
IR RECEIVER
(BACK)
12 VDC
SHIELD WIRED
TO
GROUND
DO NOT
CONNECT
SHIELD
Wiring Configuration for 2-twisted pair shielded wir
e with drain
