background image

“WARNING”

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

“CAUTION”

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

COVER. NO USER - SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALI-
FIED SERVICE PERSONNEL. 

The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsu-
lated “dangerous voltage” within the products enclosure that
may be of sufficient magnitude to constitute a risk of electric
shock to persons.

The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompa-
nying the appliance.

SAFETY INSTRUCTIONS

1. Read Instructions - All the safety and operating instructions should be read

before the appliance is operated.

2. Retain Instructions - The safety and operating instructions should be retained

for future reference.

3. Heed Warnings - All warnings on the appliance in the operating instructions

should be adhered to.

4. Follow Instructions - All operating and user instructions should be followed.
5. Water and Moisture - To prevent fire or shock hazard do not expose this sub-

woofer system to rain or excessive moisture. The appliance should not be
used near water - for example, near a bathtub, washbowl, kitchen sink, laun-
dry tub, in a wet basement, or near a swimming pool, and the like.

6. Heat - The appliance should be situated away from heat sources such as radi-

ators, heat registers, stoves, or other appliances ( including amplifiers ) that
produce heat.

7. Power Sources - The appliance should be connected to a power supply only

of the type described in the operating instructions or as marked on the appli-
ance.

8. Grounding or Polarization - The precautions that should be taken so that the

grounding or polarization means of an appliance is not defeated. The sub-
woofer may be equipped with a polarized alternating current line plug (a plug
having one blade wider than the other). This plug will fit into the power outlet
only one way. This is a safety feature. If you are unable to insert the plug fully
into the outlet, try reversing the plug. If the plug is still unable to fit, contact or
electrician to replace your obsolete outlet.

9. Power - Cord Protection - Power supply cords should be routed so that they

are not likely to be walked on or pinched by items placed upon or against
them, paying particular attention to cords at plugs, receptacles, and the point
where they exit from the appliance.

10.Cleaning - The appliance should be cleaned only as recommended by the

manufacturer.

11.Non-use Periods - The power cord of the appliance should be unplugged from

the outlet when left unused for a long period of time.

12.Object and Liquid Entry - Care should be taken so that objects do not fall and

liquids are not spilled into the enclosure through the openings.

13.Damage Requiring Service - The appliance should be serviced by qualified

service personnel when:
A.  The power - supply cord or the plug has been damaged; or 
B.  Objects have fallen, or liquid has been spilled into the appliance; or
C.  The appliance has been exposed to rain; or
D.  The appliance does not appear to operate normally; or 
E.  The appliance has been dropped or the enclosure is damaged.

14.Servicing - The user should not attempt to service the appliance beyond that

described in the operating instructions. All other servicing should be referred
to qualified service personnel. 

15.The apparatus shall not be exposed to dripping or splashing and no objects

filled with liquids, such as vases, shall be placed on the apparatus.

PRECAUTIONS

1. Do Not Touch The Unit With Wet Hands. Do not handle the unit or power cord

when your hands are wet or damp. If water or any other liquid enters the
amplifier cabinet, take the amplifier to qualified service personal for inspec-
tion.

2. Location of the Unit - Do not expose the unit to direct sun light or heating

units as the amplifier internal components temperature may rise and shorten
the life of the components. Avoid damp and dusty places.

3. Care – From time to time you should wipe off the front and side panels and

the cabinet with a soft cloth. Do not use rough material, thinners, alcohol or
other chemical solvents or cloths since this may damage the finish or
remove the panel lettering.

4. Lightning – For added protection for the subwoofer during a lightning storm,

or when left unattended and unused for a long period of time, unplug it from
the wall outlet. This will prevent damage to the subwoofer due to a lightning
strike and power-line surges.

5. Do not operate the speakers or subwoofer with the bass, treble and loud-

ness controls set to full boost. This will place undue strain on the electronics
and speakers and could damage them.

6. Whenever changing cables, pulling plugs, etc., always turn off all equipment

including the subwoofer. This prevents transients from entering the speakers
and prevents electrical energy from reaching the user. Keep all connections
out of the reach of children.

2

IMPORTANT SAFEGUARDS

Содержание R10DT









Отзывы: