10
VACUUM CLEANER ASSEMBLY
Ensure the unit is unplugged before assembling.
1.
Place the dust container onto the unit, base first, then tilt forward to engage
the top. To remove, press the dust container release button, located next to
the handle.
Note
: Do not carry the unit using the dust container.
2.
With the handle securing clip lifted upwards, insert the handle into the
main body, aligning the plastic rib with the groove in the handle inlet.
Important
: Ensure you press down the securing clip located on the back of the
unit below the hose hook to secure the handle in place.
3.
The hose wraps around the hook located above the handle securing clip.
The nozzle is placed into the brush hose inlet. To remove the hose for use,
gently pull it out from the hose inlet.
4.
The extension tube is stored on board the vacuum, located next to the hose
inlet, with the crevice tool inserted into the top of the hose.
5
. The brush tool is stored on board the vacuum, located on the back of the
unit below the handle securing clip.
