Installation
1. After installation, do not switch the power to the refrigerator on for at least 3
hours
– the unit needs to stand. The unit should be kept away from direct
sunlight. If the appliance is located on carpet, damage may be caused to the
carpet due to heat being emitted from the unit.
2. Remove all transport tapes and foam protection pieces including the bottom
panel. Clean the interior of the refrigerator with a cloth dampened in lukewarm
soap and water. Wipe with clear water and wipe dry.
3. When the appliance has been positioned, adjust the two front feet to ensure the
unit is stable. This is essential to ensure quiet running and proper door opening
/closing. See fig 1.0 below.
4. Once the appliance has been standing for 3 hours, plug in the refrigerator,
locate the thermostat knob inside the compartment and set to "3" position and
switch on the electricity . The compressor will begin to work. Close the door.
5. Leave the appliance for a minimum of 3 hours for the correct temperature to be
reached before placing food inside.
For Customer Services, Spare Parts &
Manufacturer’s Guarantee Information please call
01204 664 084
-8-
Fig 1.0