background image

9

Allow to stand for a minimum of 3 hours before plugging in to the mains

The temperature in the appliance is controlled by the temperature control knob 
located inside the fridge. Rotate the control knob left or right to regulate the 
temperature inside the fridge. 

On the temperature control, 0 is OFF, 1 is the warmest setting and 5 is the 
coldest setting. 

Under normal conditions the temperature control should be set 

at setting 2 or 3 in the Summer (high ambient temperature)/normal conditions 
(low ambient temperature) and setting 1 or 2 in the Winter. 

Setting 5 should be 

used as a rapid cool setting and should only be set 2 hours before a large amount 
of food is placed in the fridge. The temperature control should be put back to 
setting 1 -

3

(dependent on the ambient temperature) after the food has been 

placed in the fridge, if this is not done the temperature in the fridge 
compartment could fall below 0

º

C as the compressor will run continuously.

Once the temperature control has been set, close the door and plug in the 
appliance.  We recommend that the door is not opened for a minimum of 4 
hours to allow the appliance to reach the standard operating temperature. 

Note: The standard operating temperature for the fridge compartment should be 
between 0

º

C and 4

º

C.

Note: The temperature of the freshly stored food and how often the door
is opened affects the temperature in the refrigerator compartment. If
required, change the temperature setting.

Usage

Temperature Selection

Summer 

Normal

Winter

Set on 2 - 3

Set on 2 - 3

Set on 1 - 2

Содержание RHTTLDR2

























Отзывы: