9
Allow to stand for a minimum of 3 hours before plugging in to the mains
The temperature in the appliance is controlled by the temperature control knob
located inside the fridge. Rotate the control knob left or right to regulate the
temperature inside the fridge.
On the temperature control, OFF is off, MIN is the warmest setting and MAX is
the coldest setting.
Under normal conditions the temperature control should
be set between the MIN and MED position
. The MAX setting should be used as
a rapid cool setting and should only be set 2 hours before a large amount of
food is placed in the fridge. The temperature control should be put back to
between the MIN and MED setting after the food has been placed in the fridge,
if this is not done the temperature in the fridge compartment could fall below
0
º
C as the compressor will run continuously.
Once the temperature control has been set, close the door and plug in the
appliance. We recommend that the door is not opened for a minimum of 4
hours to allow the appliance to reach the standard operating temperature.
Note: The standard operating temperature for the fridge compartment should
be between 0
º
C and 4
º
C.
•
Note: The temperature of the freshly stored food and how often the door
is opened affects the temperature in the refrigerator compartment. If
required, change the temperature setting.
Usage