For Customer Services, Spare parts & Warranty Information please call 0845 683 8717
-8-
3.2 Adjustment of feet
.
3.3 Gas connection
the hose must never be at any point in its length in contact with the 'hot'
parts of the cooker;
the hose must never be longer than 1.5 metre;
the hose must not be subject to any tension or torsional stress and it must
not have any excessively narrow curves or bottlenecks;
the hose must be easy to inspect along its entire length to check its
condition;
the hose must always be in good condition, never attempt to repair.
!
The installation must comply with gas safety (installation and use) regulations
1984. In all cases for the above, by law, a qualified, corgi approved engineer
must be called for installation.
Your
stands on 4 adjustable feet. When
the product is placed where it is to be used,
check if the product is balanced. If it is not
balanced, you can make the adjustment by
turning the feet clockwise if required. It is
possible to raise the appliance maximum 35mm
by the feet. If the feet are adjusted do not move
the appliance by dragging, it should be moved
by lifting it up
Assembly of gas supply and leakage check
The cooker should be connected to the gas-supply by a gas safe registered
installer. During installation of this product it is essential to fit an approved gas
tap to isolate the supply from the appliance for the convenience of any
subsequent removal or servicing. Connection of the appliance to the gas mains
or liquid gas must be carried out according to the prescribed regulation in force,
and only after it is ascertained that it is adaptable to the type of gas to be used.
You can find the information related to appropriate gas types and appropriate
gas injectors on technical data table. If the pressure of used gas is different
than these values stated or not stable in your area,
it may be required to
assemble an available
pressure regulator on the gas inlet. It is certainly
required to contact to the authorised service to make these adjusments.
The points that must be checked during flexible hose assembly
Connecting the gas supply
To make the connection, a flexible hose should be used corresponding to the
current gas regulations which are:
●
●
●
●
●
product
Figure 6
