7
•
Dry the appliance completely after cleaning.
CAUTION: In case of sudden power failure after first use, unplug the unit, as the pressure of
gas in the cooling system of your appliance has not been balanced yet.
IN CASE OF ANY POWER FAILURE
•
Within the first six hours of the first use, unplug the water dispenser, wait for one hour then
plug in the water dispenser.
•
If it occurs after the first six hours of operation, your appliance will start to operate
automatically after 10 minutes.
•
If your appliance has not started to cool after the above mentioned time periods, call the
Authorized Service Centre.
TROUBLESHOOTING
Trouble
Probable Cause
Water dispenser does not operate
It is not plugged in.
Fuse has blown or failed.
Water which comes from cold water tap is not
sufficiently cold.
Ensure that cold water button on the back is
switched on
Water dispenser has not been placed far enough
away from the wall.
Water dispenser does not heat the water.
Ensure that hot water button on the back is
switched on.
Surface of the heater in the hot water tank may
have been calcified. Read and apply the text of
cleaning the water dispenser.
Compressor is operating and stopping
frequently
Room temperature is over the normal.
Water dispenser has not been placed on the
distance sufficiently far from the wall.
Water dispenser vibrates
Ensure that the water dispenser is placed on a
level surface.
Water dispenser is noisy.
Noise may be caused from flow of cooling agent,
this is normal.
You can hear a flow sound at the end of each
circulation.
Clinking sounds may occur as a result of
contraction and expansion because of heating
and cooling of water tanks.
Ensure that the water dispenser is placed on a
level surface.
