Russell Hobbs RHSV1C, Инструкция по эксплуатации

Страница: 7 / 12

VACUUMING WITH THE UPRIGHT STICK VACUUM
• Slide the upright stick vacuum power on/off switch away from you to switch the vacuum on.
The floor tool power light will illuminate.
• Move the floor tool over the surface cleaning a small area at a time.
• When you move to a new area, overlap the previous area to make sure none of the surface
is missed.
• When you have finished vacuuming, slide the power on/off switch towards you to switch
the vacuum off.
VACUUMING WITH THE HANDHELD VACUUM
The handheld vacuum is perfect for cleaning small spills, furniture, car seats etc.
• To remove the handheld vacuum, press the handheld vacuum release button and pull
forward and upwards away from the upright frame.
• The crevice tool will automatically slide part-way out as you remove the handheld vacuum.
• If you wish to use the handheld vacuum with the crevice tool fully extended, pull the tool out
until the locking tab snaps into place. Otherwise, simply push it back into the unit.
Note: Be sure to press the crevice tool locking tab and push the tool in before placing the
handheld vacuum back into the upright frame.
FINISHED CLEANING?
• Slide the power on/off switch towards you to switch the vacuum off.
• Return the stick vacuum assembly to the charging station ready for the next clean.
CLEANING THE VACUUM
• Switch the vacuum off.
• Do not put any part of the vacuum in a dishwasher.
• Do not use harsh or abrasive cleaning agents or solvents.
• Wipe external surfaces with a damp cloth. A dab of dishwashing liquid can help remove
stubborn stains.
• Wipe off any traces of soap and dry before using.
REMOVING AND EMPTYING THE DUST BIN
• The vacuum will work until the dust bin is full but you may find a loss of performance
as the dust bin nears capacity.
• Switch the vacuum off and allow time for the dust to settle.
• To remove the dust bin, hold the handheld vacuum by the dust bin with the crevice tool
facing the floor.
• Press the dust bin release button and turn the dust bin clockwise to separate it from the
motor unit.
• Lift the filters out of the dust bin and clean. (refer to ‘Cleaning the filters’ section)
• Empty the contents of the vacuum cleaner dust bin into a rubbish bin.
CLEANING THE FILTERS
While emptying the dust bin, check the filters - blocked filters quickly reduce suction. Make sure
the space you are using is protected with an old towel or some newspaper as this process can
be messy.