background image

 

Safety information 

 

-  When you receive your machine, check for damage to the packaging and unit. 
-  Never start a machine that is damaged. Contact 

01204 664 084 

for advice if 

your machine is received in a damaged state.

 

 

When installing your machine 

 

-  Ensure you choose a suitable, safe and level place to install your machine. 
-  This machine should always be installed by a qualified engineer. 
-  Only original spare parts should be used with this machine. 
-  Before installing, ensure the machine is unplugged. 
-  All electrical values must match the values indicated on the rating plate. 
-  Ensure the machine does not stand on the electricity supply cable. 
-  Never use an extension cable or multiple power point cable when using the 

appliance. 

-  Before using the machine, run a full cycle with the machine empty. 

 

Daily Use 

 

-  This machine is for domestic use only. Commercial use of the washer will void 

the manufacturer’s warranty.  

-  Do not overload the machine. Only place dishwasher safe items in the 

machine. 

-  Only use detergents and rinse aids specifically designed for dishwashers. Use 

of other detergents will void the manufacturer’s warranty. 

-  Do not drink water out of the machine. 
-  Do not use chemical dissolving agents such as solvents 

– this may cause an 

explosion.  

-  Check that plastic items are heat resistant before placing them in the 

machine. 

-  Do not overfill the machine 

– this can cause damage. 

-  Do not open the door while it is in operation. The machine will stop but there 

is still a risk of burning. 

-  Do not leave the dishwasher door open. This could lead to injury. 
-  Always place knives and other sharp object face down in the dishwasher to 

minimise risk of injury. 

-  This machine is not designed to be used by children and should only be used 

by capable individuals. 

-  Ensure the appliance is only used by persons with sufficient capabilities, 

experience and knowledge. The instructions in this manual should be followed 
at all times. 

For Customer Services, Spare Parts & Manufacturer's Warranty Information please call 

01204 664 084 

-7- 

 

Содержание RHSLDW1




























Отзывы: