Russell Hobbs RHPK02, Инструкции и гарантия

Страница: 5 / 32

5
37. Remove the kettle from its base before filling or pouring.
38. This appliance must not be operated by an external timer or remote control
system.
BEFORE USING THE KETTLE FOR THE FIRST TIME
Carefully remove your kettle from the box. You may wish to retain the packaging for
further use.
Before first use, fill the kettle with cold water to the MAX water level mark, bring to boil
and discard the boiling water
– do this twice. This will ensure that any residues left over
from the manufacturing process are completely removed.
POSITIONING THE KETTLE
•
Position the power base on a dry flat surface away from any potential heat
source.
•
Unwind the length of the mains cable required to reach the mains socket.
•
Ensure the mains cable does not hang over the work surface edge.
FILLING THE KETTLE
•
Remove the kettle from the power base.
•
Open the lid.
•
Fill the kettle between the MIN and MAX markings on the water level indicator
with cold water.
•
Close the lid and place the kettle back on the power base. Make sure the lid is
securely closed before boiling.
•
Always remove the kettle from the power base before filling. Do not fill the kettle
above the MAX mark or below the MIN mark on the water gauge.
SWITCHING ON
•
Position the kettle on the power base.
•
Plug the kettle into a mains supply socket.
•
To start boiling the kettle, press the on/off switch.
•
The power indicator light will illuminate and the kettle will start to boil.
•
Never open the lid or touch the stainless steel surface during boiling.