1.
Ensure the unit is unplugged. Place the motor base on a clean, dry and level
surface such as a counter or table top.
2.
Add required ingredients to a drinking cup or mill. Do not fill the cups or mill past the
maximum level indicated.
3.
Place the Nutriblend blade or milling blade onto the cup or mill and twist it into
place, ensure it is sealed tightly (Fig. 1).
4.
Plug the unit into the power outlet and ensure the power is on.
5.
Turn the cup upside down and place it onto the motor base, ensure the tabs on the
cup are aligned with the tabs on the motor base. Press the cup down and then turn
it clockwise until it is locked into place (Fig. 2 & 3).
IMPORTANT: The unit will
automatically start as soon as the cup or mill is locked into place.
6.
Once the desired consistency has been reached, stop the appliance by applying
pressure downwards onto the mill or cup and turning it anti-clockwise until the tabs
are aligned and the cup or mill springs out of place thus removing pressure from the
cup (Fig. 4 & 5).
7.
Ensure the electrical outlet is switched off at the wall and unplug the unit.
8.
Turn the cup upright and remove the blades by twisting the blade assembly
counterclockwise.
9.
Place the desired lid on the drinking cup or mill.
TAKE NOTE
:
The blender features a unique safety system that prevents damage to the unit’s motor and
drive system should the appliance be inadvertently overloaded. If the appliance has been
overloaded, the motor will stop working. To reset the appliance, follow the procedure
below:
1. Unplug the appliance from the electrical outlet.
2. Remove and empty the cup or mill and ensure that no object or ingredient is
jamming the blades.
3. Allow the appliance to cool for approximately 30 minutes and then proceed to use
the appliance as instructed above.
NUTRIBLEND RECIPES
Peanut Butter Hummus:
Ingredients:
