6
Insert the wooden post into the top of the tripod
Ensure the slot is at the top and the small hole in the side at the bottom of the wooden
post is aligned with the post securing knob as shown and then push all the way down.
This is very important as it ensures the head of the fan is positioned over a leg for
maximum stability.
Tighten the post securing knob clockwise into the hole in the side of the post until fully
secure.
The next step is to assemble the post / adjustable fan head mount to the wooden post.
First, remove the tilt range knob by unscrewing it and slide the tilt adjustment bolt out as
shown below.