READ THE GARMENT LABELS AND FOLLOW THE MANUFACTURER’S
IRONING INSTRUCTIONS THAT ARE OFTEN SHOWN BY SYMBOLS SIMILAR
TO THE FOLLOWING :
How To Fill Tank With Water
Note :It is recommend to use purified or mineral water.
1.
Disconnect the iron from the mains supply outlet.
2.
Move the Steam Control/Self-Cleaning Knob to position.
3.
Release the Water Inlet Cover.
4.
Fill water through the water inlet hole.
5.
Fill up to the ‘Max’ level marked on the side of the water tank.
Note:
For best result, it is advisable to use de-mineralised water or distilled
water.
Do not use chemically de-scaled water or any other liquids.
Before Using Your Iron For First Time Ironing
Clean the water tank and the steam vents in the soleplate to remove dust,
which may have accumulated during the manufacturing process. Some
vapour may be given off when the iron is first used. This is quite safe and
will stop after a short time.
1.
Read the instruction manual carefully from beginning to end.
2.
Remove any protective wrappings or stickers from the soleplate and the
cabinet.
3.
Unwind and straighten the power cord.
4.
Fill the water tank with de-mineralised water or distilled water. (See How
To Fill Tank with Water)
5.
Connect the iron to a suitable mains supply outlet.
6.
Turn the Temperature Dial in a clockwise direction to maximum position;
pilot light glows.
7.
Pilot light goes off when the required temperature is reached.
8.
Move the Steam Control/Self-Cleaning Knob to position; steam starts
coming out from the holes in the soleplate.
9.
Begin first time ironing with an old towel.
Temperature Control Setting
. Acetate
. Elastsne
. Polyamide
. Polypropylene
. Cupro
. Polyester
. Protein
. Silk
. Triacetate
. Viscose
. Wool
. Cotton
. Linen
PAGE 5 OF 12
