Before Switching On
•
Before using your appliance, add a teaspoon of bicarbonate of soda to
warm water and with a damp cloth wipe down all parts of the new
appliance, then repeat the process with a clean damp cloth and dry
(ensure
the appliance is not connected to the power when performing this task).
•
Remove all transport tapes and foam protection pieces. Clean the interior
with a cloth dampened in lukewarm soap and water. Wipe with clean water
and wipe dry.
•
There may be an odour when you first switch on the appliance, it will
disappear when the appliance starts to cool.
•
When the appliance has been positioned, adjust the feet to ensure the unit
is stable. This is essential to ensure quiet running and proper door opening
/closing.
•
Connect to the electrical socket but do not switch the power to the cooler
on for at least 3 hours. The coolant within the product needs time to settle
after it has been transported and put in to position, failure to do this will
affect the cooling performance of your appliance.
•
Once the appliance has settled, locate the thermostat knob on the product
(this is at the rear of the appliance and set between position “4” and “5” and
switch on the power. The compressor will begin to work. Close the door.
•
You may hear faint gurgling or bubbling sounds when the refrigerant is
pumped to the cooling system and through the coils or tubing at the rear of
the appliance. When the compressor is in operation you may hear a slight
whirring sound or pulsating noise. The thermostat controls the operation
of the compressor, and you may hear a slight click as it cycles in and out
(this is normal).
•
To save energy, you should minimize the frequency and duration of door
opening.
r6.2
For Customer Services, Spare Parts & Warranty Information please call
0845 209 7461
- 7 -